简述网络推广5种方法seo经验

设备接线准备

设备调试

代码实现

Modbus TCP Client 读取电表数据

读取寄存器数据转成32bit Float格式

原理

/*** *  17038,  7864 
参考 https://blog.csdn.net/qq_36270361/article/details/115823294SEEE EEEE EMMM MMMM MMMM MMMM MMMM MMMM
0100 0010 1000 1110 0000 1111 0101 1100s = 0
e = (1000 0101)转10进制 133  - 127 = 6
尾数
000 1110 0000 1111 0101 1100
4#在尾数的左边有一个省略的小数点和1,这个1在浮点数的保存中经常省略,
1.000 1110 0000 1111 0101 1100
指数值e = 6，因此小数点向右移动6位，得到尾数值如下：
1000111.0 0000 1111 0101 1100整数1 *2^6 + 0 *2^5 + 0 *2^4 + 0 *2^3 + 1* 2^2 + 1 *2^1 + 1*2^0
64 + 0+0+0 + 4 + 2 + 1 
71
小数部分前面0太多可以忽略不记了0 * 2^-1 + 0 * 2^-2 + 0 * 2^-3 + 0 * 2^-4 + 0 * 2^-5 ....
浮点数值 = 整数 + 小数 = 71 + 0 = 71
*/ 

function toFloat(s1, s2)
{// s1：第一个寄存器地址数据，s2：第二个寄存器地址数据//将输入数值short转化为无符号unsigned shortconst us1 = s1, us2 = s2; // intif (s1 < 0) us1 += 65536;if (s2 < 0) us2 += 65536;//sign: 符号位, exponent: 阶码, mantissa:尾数let sign, exponent; // intlet mantissa; // float//计算符号位sign = parseInt(us1 / 32768); // js中只需要整数//去掉符号位let emCode = us1 % 32768; // int//计算阶码exponent = parseInt(emCode / 128);//计算尾数mantissa = (emCode % 128 * 65536 + us2) / 8388608; // float//代入公式 fValue = (-1) ^ S x 2 ^ (E - 127) x (1 + M)const S = Math.pow(-1, sign)const E = Math.pow(2, exponent - 127)const M = (1 + mantissa)return S * E * M;
}

然后使用modbusTCP Client 读取数据

// create an empty modbus client
const ModbusRTU = require("modbus-serial");
const client = new ModbusRTU();// open connection to a tcp line
client.connectTCP("10.0.0.251", { port: 24 });
client.setID(1);
// read the values of 10 registers starting at address 0
// on device number 1. and log the values to the console.
setInterval(() => {console.log('-----read-----')client.readHoldingRegisters(4157, 10, (err, data) =>{// data: {//  data: [17038,  7864]//  buffer // buffer 数据 实际上转换出来就是data数组// } if (data?.data){console.log(data.data);const powerData = toFloat(data.data[0], data.data[1])console.log('-------powerData------', powerData)}});
}, 3000);

使用mqtt协议接入物联网平台

const mqtt = require("mqtt");
const md5 = require('js-md5');const secureId = "admin";
const secureKey = "adminkey";
const timestamp = new Date().getTime()
const username = `${secureId}|${timestamp}`
const password = md5(username + "|" + secureKey)
const config = {url: "mqtt://10.0.0.108:1883",productId: '1696816545212956672',clientId: "1704681506453053440", // 电表设备idhost: '10.0.0.108',port: 1883
}const mqttClient = mqtt.connect({clientId: config.clientId,username,password,host: config.host,port: config.port,protocol: 'mqtt'
}); //指定服务端地址和端口// 推送数据
function publishData (key, value) {const msg  = {"deviceId": config.clientId,"properties": {[key]: value}}mqttClient.publish(`/${config.productId}/${config.clientId}/properties/report`,JSON.stringify(msg))
}//连接成功
mqttClient.on("connect", function() {console.log("服务器连接成功");publishData('online_time', new Date().getTime()) // 上报一条上线的消息});

最终代码实现

function toFloat(s1, s2)
{// s1：第一个寄存器地址数据，s2：第二个寄存器地址数据//将输入数值short转化为无符号unsigned shortconst us1 = s1, us2 = s2; // intif (s1 < 0) us1 += 65536;if (s2 < 0) us2 += 65536;//sign: 符号位, exponent: 阶码, mantissa:尾数let sign, exponent; // intlet mantissa; // float//计算符号位sign = parseInt(us1 / 32768); // js中只需要整数//去掉符号位let emCode = us1 % 32768; // int//计算阶码exponent = parseInt(emCode / 128);//计算尾数mantissa = (emCode % 128 * 65536 + us2) / 8388608; // float//代入公式 fValue = (-1) ^ S x 2 ^ (E - 127) x (1 + M)const S = Math.pow(-1, sign)const E = Math.pow(2, exponent - 127)const M = (1 + mantissa)return S * E * M;
}
// create an empty modbus client
const ModbusRTU = require("modbus-serial");
const client = new ModbusRTU();// open connection to a tcp line
client.connectTCP("10.0.0.251", { port: 24 });
client.setID(1);const mqtt = require("mqtt");
const md5 = require('js-md5');const secureId = "admin";
const secureKey = "adminkey";
const config = {url: "mqtt://10.0.0.108:1883",productId: '1696816545212956672',clientId: "1704681506453053440", // 电表设备idhost: '10.0.0.108',port: 1883
}
let mqttClient = null
let reconnectInterval = 1000;
let reconnectTimer = null;// 推送数据
function publishData (key, value) {const msg  = {"deviceId": config.clientId,"properties": {[key]: value}}mqttClient?.publish(`/${config.productId}/${config.clientId}/properties/report`,JSON.stringify(msg))
}function createClient() {if(mqttClient){return;}const timestamp = new Date().getTime()const username = `${secureId}|${timestamp}`const password = md5(username + "|" + secureKey)mqttClient = mqtt.connect({clientId: config.clientId,username,password,host: config.host,port: config.port,protocol: 'mqtt',}); //指定服务端地址和端口//连接成功mqttClient?.on("connect", function() {console.log("服务器连接成功");publishData('online_time', new Date().getTime())});// 断线重连mqttClient.on('error', (error) => {console.log('error:',new Date().getTime(), error);reconnect();});mqttClient.on('end', () => {console.log('end-------:', new Date().getTime());reconnect();});
}function reconnect() {console.log(`reconnecting in ${reconnectInterval}ms...`);reconnectTimer = setTimeout(createClient, reconnectInterval);reconnectInterval = Math.min(reconnectInterval * 2, 30000);
}// 创建链接
createClient()// read the values of 10 registers starting at address 0
// on device number 1. and log the values to the console.
setInterval(() => {console.log('-----read-----')client.readHoldingRegisters(4157, 2, (err, data) =>{if (data?.buffer){console.log(data.data);const powerData = toFloat(data.data[0], data.data[1])console.log('------powerData-------', powerData)publishData('total_working_energy', powerData)}});
},5 * 60 * 1000);

效果预览