网站怎么添加外链,华为云网站备案流程,网站怎么加ico,wordpress页面排版插件一、介绍
golangci-lint 是一个代码检查工具的集合#xff0c;聚集了多种 Go 代码检查工具#xff0c;如 golint、go vet 等。
优点#xff1a;
运行速度快可以集成到 vscode、goland 等开发工具中包含了非常多种代码检查器可以集成到 CI 中这是包含的代码检查器列表聚集了多种 Go 代码检查工具如 golint、go vet 等。
优点
运行速度快可以集成到 vscode、goland 等开发工具中包含了非常多种代码检查器可以集成到 CI 中这是包含的代码检查器列表Linters
二、安装
golangci-lint 官方不建议使用 go get 方式安装推荐使用二进制安装。
MacOS
直接使用 homebrew 安装
brew install golangci-lint
brew upgrade golangci-lintLinux 和 Windows
# binary will be $(go env GOPATH)/bin/golangci-lint
curl -sSfL https://raw.githubusercontent.com/Goci/golangci-lint/master/install.sh | sh -s -- -b $(go env GOPATH)/bin v1.42.1golangci-lint --versiongolangci-lint 将会被安装到 GOPATH/bin 目录中如果此目录不在环境变量路径中需要加上。
三、使用方式
命令行
在项目根目录下执行以下命令检查整个项目的代码
golangci-lint run其等价于:
golangci-lint run ./...或者可以指定检查某个目录下的代码文件指定目录时不会递归分析其子目录要递归分析其子目录需要加上 /…
golangci-lint run dir1 dir2/... dir3/file1.go在没有配置文件时golangci-lint 会使用默认的代码检查器进行检查。
使用以下命令可以查看默认启用和关闭了哪些检查器
golangci-lint help linters四、集成 IDE
1. Visual Studio Code
在 vscode 配置文件中新增以下内容
go.lintTool:golangci-lint,
go.lintFlags: [--fastgolangci-lint 会自动查找项目中的 .golangci.yml 配置文件不用额外配置。
2. Goland
安装插件 Go Linter
可以在 Goland 内插件市场搜索 Go Linter 直接安装。
配置 File Watchers
在 Goland 配置页面的 工具 - File Watchers 进行配置。 点 按钮选择 golangci-lint 创建。
五、排除代码检查 有时候有部分代码因为各种原因不能通过代码检查也不能修改可以使用注释跳过代码检查。如下所示 var bad_name int //nolint
var bad_name int //nolint:golint,unused可以排除一整块代码 //nolint
func allIssuesInThisFunctionAreExcluded() *string {// ...
}//nolint:govet
var (a intb int
)一整个文件 //nolint:unparam
package pkg六、配置文件
golangci-lint 会自动在当前目录下查找以下名称的配置文件
.golangci.yml
.golangci.yaml
.golangci.toml
.golangci.json配置启用的代码选择器
linters:disable-all: trueenable:- megacheck- govetenable-all: truedisable:- maligned- preallocpresets:- bugs- unusedfast: false示例配置 以下是官方给出的配置文件示例包含了可以设置的选项和选项的默认值
# This file contains all available configuration options
# with their default values.# options for analysis running
run:# default concurrency is a available CPU numberconcurrency: 4# timeout for analysis, e.g. 30s, 5m, default is 1mtimeout: 1m# exit code when at least one issue was found, default is 1issues-exit-code: 1# include test files or not, default is truetests: true# list of build tags, all linters use it. Default is empty list.build-tags:- mytag# which dirs to skip: issues from them wont be reported;# can use regexp here: generated.*, regexp is applied on full path;# default value is empty list, but default dirs are skipped independently# from this options value (see skip-dirs-use-default).# / will be replaced by current OS file path separator to properly work# on Windows.skip-dirs:- src/external_libs- autogenerated_by_my_lib# default is true. Enables skipping of directories:# vendor$, third_party$, testdata$, examples$, Godeps$, builtin$skip-dirs-use-default: true# which files to skip: they will be analyzed, but issues from them# wont be reported. Default value is empty list, but there is# no need to include all autogenerated files, we confidently recognize# autogenerated files. If its not please let us know.# / will be replaced by current OS file path separator to properly work# on Windows.skip-files:- .*\\.my\\.go$- lib/bad.go# by default isnt set. If set we pass it to go list -mod{option}. From go help modules:# If invoked with -modreadonly, the go command is disallowed from the implicit# automatic updating of go.mod described above. Instead, it fails when any changes# to go.mod are needed. This setting is most useful to check that go.mod does# not need updates, such as in a continuous integration and testing system.# If invoked with -modvendor, the go command assumes that the vendor# directory holds the correct copies of dependencies and ignores# the dependency descriptions in go.mod.modules-download-mode: readonly|vendor|mod# Allow multiple parallel golangci-lint instances running.# If false (default) - golangci-lint acquires file lock on start.allow-parallel-runners: false# output configuration options
output:# colored-line-number|line-number|json|tab|checkstyle|code-climate|junit-xml|github-actions# default is colored-line-numberformat: colored-line-number# print lines of code with issue, default is trueprint-issued-lines: true# print linter name in the end of issue text, default is trueprint-linter-name: true# make issues output unique by line, default is trueuniq-by-line: true# add a prefix to the output file references; default is no prefixpath-prefix: # sorts results by: filepath, line and columnsort-results: false# all available settings of specific linters
linters-settings:cyclop:# the maximal code complexity to reportmax-complexity: 10# the maximal average package complexity. If its higher than 0.0 (float) the check is enabled (default 0.0)package-average: 0.0# should ignore tests (default false)skip-tests: falsedogsled:# checks assignments with too many blank identifiers; default is 2max-blank-identifiers: 2dupl:# tokens count to trigger issue, 150 by defaultthreshold: 100errcheck:# report about not checking of errors in type assertions: a : b.(MyStruct);# default is false: such cases arent reported by default.check-type-assertions: false# report about assignment of errors to blank identifier: num, _ : strconv.Atoi(numStr);# default is false: such cases arent reported by default.check-blank: false# [deprecated] comma-separated list of pairs of the form pkg:regex# the regex is used to ignore names within pkg. (default fmt:.*).# see https://github.com/kisielk/errcheck#the-deprecated-method for detailsignore: fmt:.*,io/ioutil:^Read.*# [deprecated] use exclude-functions instead.# path to a file containing a list of functions to exclude from checking# see https://github.com/kisielk/errcheck#excluding-functions for detailsexclude: /path/to/file.txt# list of functions to exclude from checking, where each entry is a single function to exclude.# see https://github.com/kisielk/errcheck#excluding-functions for detailsexclude-functions:- io/ioutil.ReadFile- io.Copy(*bytes.Buffer)- io.Copy(os.Stdout)errorlint:# Check whether fmt.Errorf uses the %w verb for formatting errors. See the readme for caveatserrorf: true# Check for plain type assertions and type switchesasserts: true# Check for plain error comparisonscomparison: trueexhaustive:# check switch statements in generated files alsocheck-generated: false# indicates that switch statements are to be considered exhaustive if a# default case is present, even if all enum members arent listed in the# switchdefault-signifies-exhaustive: falseexhaustivestruct:# Struct Patterns is list of expressions to match struct packages and names# The struct packages have the form example.com/package.ExampleStruct# The matching patterns can use matching syntax from https://pkg.go.dev/path#Match# If this list is empty, all structs are tested.struct-patterns:- *.Test- example.com/package.ExampleStructforbidigo:# Forbid the following identifiers (identifiers are written using regexp):forbid:- ^print.*$- fmt\.Print.*# Exclude godoc examples from forbidigo checks. Default is true.exclude_godoc_examples: falsefunlen:lines: 60statements: 40gci:# put imports beginning with prefix after 3rd-party packages;# only support one prefix# if not set, use goimports.local-prefixeslocal-prefixes: github.com/org/projectgocognit:# minimal code complexity to report, 30 by default (but we recommend 10-20)min-complexity: 10goconst:# minimal length of string constant, 3 by defaultmin-len: 3# minimum occurrences of constant string count to trigger issue, 3 by defaultmin-occurrences: 3# ignore test files, false by defaultignore-tests: false# look for existing constants matching the values, true by defaultmatch-constant: true# search also for duplicated numbers, false by defaultnumbers: false# minimum value, only works with goconst.numbers, 3 by defaultmin: 3# maximum value, only works with goconst.numbers, 3 by defaultmax: 3# ignore when constant is not used as function argument, true by defaultignore-calls: truegocritic:# Which checks should be enabled; cant be combined with disabled-checks;# See https://go-critic.github.io/overview#checks-overview# To check which checks are enabled run GL_DEBUGgocritic golangci-lint run# By default list of stable checks is used.enabled-checks:- rangeValCopy# Which checks should be disabled; cant be combined with enabled-checks; default is emptydisabled-checks:- regexpMust# Enable multiple checks by tags, run GL_DEBUGgocritic golangci-lint run to see all tags and checks.# Empty list by default. See https://github.com/go-critic/go-critic#usage - section Tags.enabled-tags:- performancedisabled-tags:- experimental# Settings passed to gocritic.# The settings key is the name of a supported gocritic checker.# The list of supported checkers can be find in https://go-critic.github.io/overview.settings:captLocal: # must be valid enabled check name# whether to restrict checker to params only (default true)paramsOnly: trueelseif:# whether to skip balanced if-else pairs (default true)skipBalanced: truehugeParam:# size in bytes that makes the warning trigger (default 80)sizeThreshold: 80nestingReduce:# min number of statements inside a branch to trigger a warning (default 5)bodyWidth: 5rangeExprCopy:# size in bytes that makes the warning trigger (default 512)sizeThreshold: 512# whether to check test functions (default true)skipTestFuncs: truerangeValCopy:# size in bytes that makes the warning trigger (default 128)sizeThreshold: 32# whether to check test functions (default true)skipTestFuncs: trueruleguard:# path to a gorules file for the ruleguard checkerrules: truncateCmp:# whether to skip int/uint/uintptr types (default true)skipArchDependent: trueunderef:# whether to skip (*x).method() calls where x is a pointer receiver (default true)skipRecvDeref: trueunnamedResult:# whether to check exported functionscheckExported: truegocyclo:# minimal code complexity to report, 30 by default (but we recommend 10-20)min-complexity: 10godot:# comments to be checked: declarations, toplevel, or allscope: declarations# list of regexps for excluding particular comment lines from checkexclude:# example: exclude comments which contain numbers# - [0-9]# check that each sentence starts with a capital lettercapital: falsegodox:# report any comments starting with keywords, this is useful for TODO or FIXME comments that# might be left in the code accidentally and should be resolved before mergingkeywords: # default keywords are TODO, BUG, and FIXME, these can be overwritten by this setting- NOTE- OPTIMIZE # marks code that should be optimized before merging- HACK # marks hack-arounds that should be removed before merginggofmt:# simplify code: gofmt with -s option, true by defaultsimplify: truegofumpt:# Select the Go version to target. The default is 1.15.lang-version: 1.15# Choose whether or not to use the extra rules that are disabled# by defaultextra-rules: falsegoheader:values:const:# define here const type values in format k:v, for example:# COMPANY: MY COMPANYregexp:# define here regexp type values, for example# AUTHOR: .*mycompany\.comtemplate: # |-# put here copyright header template for source code files, for example:# Note: {{ YEAR }} is a builtin value that returns the year relative to the current machine time.## {{ AUTHOR }} {{ COMPANY }} {{ YEAR }}# SPDX-License-Identifier: Apache-2.0# Licensed under the Apache License, Version 2.0 (the License);# you may not use this file except in compliance with the License.# You may obtain a copy of the License at:# http://www.apache.org/licenses/LICENSE-2.0# Unless required by applicable law or agreed to in writing, software# distributed under the License is distributed on an AS IS BASIS,# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.# See the License for the specific language governing permissions and# limitations under the License.template-path:# also as alternative of directive template you may put the path to file with the template sourcegoimports:# put imports beginning with prefix after 3rd-party packages;# its a comma-separated list of prefixeslocal-prefixes: github.com/org/projectgolint:# minimal confidence for issues, default is 0.8min-confidence: 0.8gomnd:settings:mnd:# the list of enabled checks, see https://github.com/tommy-muehle/go-mnd/#checks for description.checks: argument,case,condition,operation,return,assign# ignored-numbers: 1000# ignored-files: magic_.*.go# ignored-functions: math.*gomoddirectives:# Allow local replace directives. Default is false.replace-local: false# List of allowed replace directives. Default is empty.replace-allow-list:- launchpad.net/gocheck# Allow to not explain why the version has been retracted in the retract directives. Default is false.retract-allow-no-explanation: false# Forbid the use of the exclude directives. Default is false.exclude-forbidden: falsegomodguard:allowed:modules: # List of allowed modules# - gopkg.in/yaml.v2domains: # List of allowed module domains# - golang.orgblocked:modules: # List of blocked modules# - github.com/uudashr/go-module: # Blocked module# recommendations: # Recommended modules that should be used instead (Optional)# - golang.org/x/mod# reason: mod is the official go.mod parser library. # Reason why the recommended module should be used (Optional)versions: # List of blocked module version constraints# - github.com/mitchellh/go-homedir: # Blocked module with version constraint# version: 1.1.0 # Version constraint, see https://github.com/Masterminds/semver#basic-comparisons# reason: testing if blocked version constraint works. # Reason why the version constraint exists. (Optional)local_replace_directives: false # Set to true to raise lint issues for packages that are loaded from a local path via replace directivegosec:# To select a subset of rules to run.# Available rules: https://github.com/securego/gosec#available-rulesincludes:- G401- G306- G101# To specify a set of rules to explicitly exclude.# Available rules: https://github.com/securego/gosec#available-rulesexcludes:- G204# Exclude generated filesexclude-generated: true# To specify the configuration of rules.# The configuration of rules is not fully documented by gosec:# https://github.com/securego/gosec#configuration# https://github.com/securego/gosec/blob/569328eade2ccbad4ce2d0f21ee158ab5356a5cf/rules/rulelist.go#L60-L102config:G306: 0600G101:pattern: (?i)exampleignore_entropy: falseentropy_threshold: 80.0per_char_threshold: 3.0truncate: 32gosimple:# Select the Go version to target. The default is 1.13.go: 1.15# https://staticcheck.io/docs/options#checkschecks: [ all ]govet:# report about shadowed variablescheck-shadowing: true# settings per analyzersettings:printf: # analyzer name, run go tool vet help to see all analyzersfuncs: # run go tool vet help printf to see available settings for printf analyzer- (github.com/golangci/golangci-lint/pkg/logutils.Log).Infof- (github.com/golangci/golangci-lint/pkg/logutils.Log).Warnf- (github.com/golangci/golangci-lint/pkg/logutils.Log).Errorf- (github.com/golangci/golangci-lint/pkg/logutils.Log).Fatalf# enable or disable analyzers by name# run go tool vet help to see all analyzersenable:- atomicalignenable-all: falsedisable:- shadowdisable-all: falsedepguard:list-type: blacklistinclude-go-root: falsepackages:- github.com/sirupsen/logruspackages-with-error-message:# specify an error message to output when a blacklisted package is used- github.com/sirupsen/logrus: logging is allowed only by logutils.Logifshort:# Maximum length of variable declaration measured in number of lines, after which linter wont suggest using short syntax.# Has higher priority than max-decl-chars.max-decl-lines: 1# Maximum length of variable declaration measured in number of characters, after which linter wont suggest using short syntax.max-decl-chars: 30importas:# if set to true, force to use alias.no-unaliased: true# List of aliasesalias:# using servingv1 alias for knative.dev/serving/pkg/apis/serving/v1 package- pkg: knative.dev/serving/pkg/apis/serving/v1alias: servingv1# using autoscalingv1alpha1 alias for knative.dev/serving/pkg/apis/autoscaling/v1alpha1 package- pkg: knative.dev/serving/pkg/apis/autoscaling/v1alpha1alias: autoscalingv1alpha1# You can specify the package path by regular expression,# and alias by regular expression expansion syntax like below.# see https://github.com/julz/importas#use-regular-expression for details- pkg: knative.dev/serving/pkg/apis/(\w)/(v[\w\d])alias: $1$2ireturn:# ireturn allows using allow and reject settings at the same time.# Both settings are lists of the keywords and regular expressions matched to interface or package names.# keywords:# - empty for interface{}# - error for errors# - stdlib for standard library# - anon for anonymous interfaces# By default, it allows using errors, empty interfaces, anonymous interfaces,# and interfaces provided by the standard library.allow:- anon- error- empty- stdlib# You can specify idiomatic endings for interface- (or|er)$# Reject patternsreject:- github.com\/user\/package\/v4\.Typelll:# max line length, lines longer will be reported. Default is 120.# \t is counted as 1 character by default, and can be changed with the tab-width optionline-length: 120# tab width in spaces. Default to 1.tab-width: 1makezero:# Allow only slices initialized with a length of zero. Default is false.always: falsemaligned:# print struct with more effective memory layout or not, false by defaultsuggest-new: truemisspell:# Correct spellings using locale preferences for US or UK.# Default is to use a neutral variety of English.# Setting locale to US will correct the British spelling of colour to color.locale: USignore-words:- somewordnakedret:# make an issue if func has more lines of code than this setting and it has naked returns; default is 30max-func-lines: 30nestif:# minimal complexity of if statements to report, 5 by defaultmin-complexity: 4nilnil:# By default, nilnil checks all returned types below.checked-types:- ptr- func- iface- map- channlreturn:# size of the block (including return statement that is still OK)# so no return split required.block-size: 1nolintlint:# Enable to ensure that nolint directives are all used. Default is true.allow-unused: false# Disable to ensure that nolint directives dont have a leading space. Default is true.allow-leading-space: true# Exclude following linters from requiring an explanation. Default is [].allow-no-explanation: [ ]# Enable to require an explanation of nonzero length after each nolint directive. Default is false.require-explanation: true# Enable to require nolint directives to mention the specific linter being suppressed. Default is false.require-specific: trueprealloc:# XXX: we dont recommend using this linter before doing performance profiling.# For most programs usage of prealloc will be a premature optimization.# Report preallocation suggestions only on simple loops that have no returns/breaks/continues/gotos in them.# True by default.simple: truerange-loops: true # Report preallocation suggestions on range loops, true by defaultfor-loops: false # Report preallocation suggestions on for loops, false by defaultpromlinter:# Promlinter cannot infer all metrics name in static analysis.# Enable strict mode will also include the errors caused by failing to parse the args.strict: false# Please refer to https://github.com/yeya24/promlinter#usage for detailed usage.disabled-linters:# - Help# - MetricUnits# - Counter# - HistogramSummaryReserved# - MetricTypeInName# - ReservedChars# - CamelCase# - lintUnitAbbreviationspredeclared:# comma-separated list of predeclared identifiers to not report onignore: # include method names and field names (i.e., qualified names) in checksq: falserowserrcheck:packages:- github.com/jmoiron/sqlxrevive:# see https://github.com/mgechev/revive#available-rules for details.ignore-generated-header: trueseverity: warningrules:- name: indent-error-flowseverity: warning- name: add-constantseverity: warningarguments:- maxLitCount: 3allowStrs: allowInts: 0,1,2allowFloats: 0.0,0.,1.0,1.,2.0,2.staticcheck:# Select the Go version to target. The default is 1.13.go: 1.15# https://staticcheck.io/docs/options#checkschecks: [ all ]stylecheck:# Select the Go version to target. The default is 1.13.go: 1.15# https://staticcheck.io/docs/options#checkschecks: [ all, -ST1000, -ST1003, -ST1016, -ST1020, -ST1021, -ST1022 ]# https://staticcheck.io/docs/options#dot_import_whitelistdot-import-whitelist:- fmt# https://staticcheck.io/docs/options#initialismsinitialisms: [ ACL, API, ASCII, CPU, CSS, DNS, EOF, GUID, HTML, HTTP, HTTPS, ID, IP, JSON, QPS, RAM, RPC, SLA, SMTP, SQL, SSH, TCP, TLS, TTL, UDP, UI, GID, UID, UUID, URI, URL, UTF8, VM, XML, XMPP, XSRF, XSS ]# https://staticcheck.io/docs/options#http_status_code_whitelisthttp-status-code-whitelist: [ 200, 400, 404, 500 ]tagliatelle:# check the struck tag name casecase:# use the struct field name to check the name of the struct taguse-field-name: truerules:# any struct tag type can be used.# support string case: camel, pascal, kebab, snake, goCamel, goPascal, goKebab, goSnake, upper, lowerjson: camelyaml: camelxml: camelbson: camelavro: snakemapstructure: kebabtestpackage:# regexp pattern to skip filesskip-regexp: (export|internal)_test\.gothelper:# The following configurations enable all checks. It can be omitted because all checks are enabled by default.# You can enable only required checks deleting unnecessary checks.test:first: truename: truebegin: truebenchmark:first: truename: truebegin: truetb:first: truename: truebegin: truetenv:# The option all will run against whole test files (_test.go) regardless of method/function signatures.# By default, only methods that take *testing.T, *testing.B, and testing.TB as arguments are checked.all: falseunparam:# Inspect exported functions, default is false. Set to true if no external program/library imports your code.# XXX: if you enable this setting, unparam will report a lot of false-positives in text editors:# if its called for subdir of a project it cant find external interfaces. All text editor integrations# with golangci-lint call it on a directory with the changed file.check-exported: falseunused:# Select the Go version to target. The default is 1.13.go: 1.15whitespace:multi-if: false # Enforces newlines (or comments) after every multi-line if statementmulti-func: false # Enforces newlines (or comments) after every multi-line function signaturewrapcheck:# An array of strings that specify substrings of signatures to ignore.# If this set, it will override the default set of ignored signatures.# See https://github.com/tomarrell/wrapcheck#configuration for more information.ignoreSigs:- .Errorf(- errors.New(- errors.Unwrap(- .Wrap(- .Wrapf(- .WithMessage(- .WithMessagef(- .WithStack(ignorePackageGlobs:- encoding/*- github.com/pkg/*wsl:# See https://github.com/bombsimon/wsl/blob/master/doc/configuration.md for# documentation of available settings. These are the defaults for# golangci-lint.allow-assign-and-anything: falseallow-assign-and-call: trueallow-cuddle-declarations: falseallow-multiline-assign: trueallow-separated-leading-comment: falseallow-trailing-comment: falseforce-case-trailing-whitespace: 0force-err-cuddling: falseforce-short-decl-cuddling: falsestrict-append: true# The custom section can be used to define linter plugins to be loaded at runtime.# See README doc for more info.custom:# Each custom linter should have a unique name.example:# The path to the plugin *.so. Can be absolute or local. Required for each custom linterpath: /path/to/example.so# The description of the linter. Optional, just for documentation purposes.description: This is an example usage of a plugin linter.# Intended to point to the repo location of the linter. Optional, just for documentation purposes.original-url: github.com/golangci/example-linterlinters:disable-all: trueenable:- megacheck- govetenable-all: truedisable:- maligned- preallocpresets:- bugs- unusedfast: falseissues:# List of regexps of issue texts to exclude, empty list by default.# But independently from this option we use default exclude patterns,# it can be disabled by exclude-use-default: false. To list all# excluded by default patterns execute golangci-lint run --helpexclude:- abcdef# Excluding configuration per-path, per-linter, per-text and per-sourceexclude-rules:# Exclude some linters from running on tests files.- path: _test\.golinters:- gocyclo- errcheck- dupl- gosec# Exclude known linters from partially hard-vendored code,# which is impossible to exclude via nolint comments.- path: internal/hmac/text: weak cryptographic primitivelinters:- gosec# Exclude some staticcheck messages- linters:- staticchecktext: SA9003:# Exclude lll issues for long lines with go:generate- linters:- lllsource: ^//go:generate # Independently from option exclude we use default exclude patterns,# it can be disabled by this option. To list all# excluded by default patterns execute golangci-lint run --help.# Default value for this option is true.exclude-use-default: false# The default value is false. If set to true exclude and exclude-rules# regular expressions become case sensitive.exclude-case-sensitive: false# The list of ids of default excludes to include or disable. By default its empty.include:- EXC0002 # disable excluding of issues about comments from golint# Maximum issues count per one linter. Set to 0 to disable. Default is 50.max-issues-per-linter: 0# Maximum count of issues with the same text. Set to 0 to disable. Default is 3.max-same-issues: 0# Show only new issues: if there are unstaged changes or untracked files,# only those changes are analyzed, else only changes in HEAD~ are analyzed.# Its a super-useful option for integration of golangci-lint into existing# large codebase. Its not practical to fix all existing issues at the moment# of integration: much better dont allow issues in new code.# Default is false.new: false# Show only new issues created after git revision REVnew-from-rev: REV# Show only new issues created in git patch with set file path.new-from-patch: path/to/patch/file# Fix found issues (if its supported by the linter)fix: trueseverity:# Default value is empty string.# Set the default severity for issues. If severity rules are defined and the issues# do not match or no severity is provided to the rule this will be the default# severity applied. Severities should match the supported severity names of the# selected out format.# - Code climate: https://docs.codeclimate.com/docs/issues#issue-severity# - Checkstyle: https://checkstyle.sourceforge.io/property_types.html#severity# - Github: https://help.github.com/en/actions/reference/workflow-commands-for-github-actions#setting-an-error-messagedefault-severity: error# The default value is false.# If set to true severity-rules regular expressions become case sensitive.case-sensitive: false# Default value is empty list.# When a list of severity rules are provided, severity information will be added to lint# issues. Severity rules have the same filtering capability as exclude rules except you# are allowed to specify one matcher per severity rule.# Only affects out formats that support setting severity information.rules:- linters:- duplseverity: info
文章转载自： http://www.morning.ryxbz.cn.gov.cn.ryxbz.cn http://www.morning.tthmg.cn.gov.cn.tthmg.cn http://www.morning.wyppp.cn.gov.cn.wyppp.cn http://www.morning.nxstj.cn.gov.cn.nxstj.cn http://www.morning.ljpqy.cn.gov.cn.ljpqy.cn http://www.morning.mxhcf.cn.gov.cn.mxhcf.cn http://www.morning.krzrg.cn.gov.cn.krzrg.cn http://www.morning.zqwqy.cn.gov.cn.zqwqy.cn http://www.morning.ljdjn.cn.gov.cn.ljdjn.cn http://www.morning.xrksf.cn.gov.cn.xrksf.cn http://www.morning.bkxnp.cn.gov.cn.bkxnp.cn http://www.morning.hpcpp.cn.gov.cn.hpcpp.cn http://www.morning.qqbw.cn.gov.cn.qqbw.cn http://www.morning.qrpdk.cn.gov.cn.qrpdk.cn http://www.morning.pdwny.cn.gov.cn.pdwny.cn http://www.morning.fdrb.cn.gov.cn.fdrb.cn http://www.morning.qwwhs.cn.gov.cn.qwwhs.cn http://www.morning.kkwgg.cn.gov.cn.kkwgg.cn http://www.morning.txjrc.cn.gov.cn.txjrc.cn http://www.morning.lfbsd.cn.gov.cn.lfbsd.cn http://www.morning.wkxsy.cn.gov.cn.wkxsy.cn http://www.morning.wjplm.cn.gov.cn.wjplm.cn http://www.morning.yhywr.cn.gov.cn.yhywr.cn http://www.morning.wklhn.cn.gov.cn.wklhn.cn http://www.morning.mhmsn.cn.gov.cn.mhmsn.cn http://www.morning.iuibhkd.cn.gov.cn.iuibhkd.cn http://www.morning.xfwnk.cn.gov.cn.xfwnk.cn http://www.morning.pqypt.cn.gov.cn.pqypt.cn http://www.morning.hqllx.cn.gov.cn.hqllx.cn http://www.morning.nlbhj.cn.gov.cn.nlbhj.cn http://www.morning.mkrqh.cn.gov.cn.mkrqh.cn http://www.morning.xrct.cn.gov.cn.xrct.cn http://www.morning.jzfrl.cn.gov.cn.jzfrl.cn http://www.morning.ptzf.cn.gov.cn.ptzf.cn http://www.morning.27asw.cn.gov.cn.27asw.cn http://www.morning.lfcfn.cn.gov.cn.lfcfn.cn http://www.morning.ynlpy.cn.gov.cn.ynlpy.cn http://www.morning.wbxtx.cn.gov.cn.wbxtx.cn http://www.morning.twhgn.cn.gov.cn.twhgn.cn http://www.morning.pypbz.cn.gov.cn.pypbz.cn http://www.morning.fgsqz.cn.gov.cn.fgsqz.cn http://www.morning.wbnsf.cn.gov.cn.wbnsf.cn http://www.morning.rntby.cn.gov.cn.rntby.cn http://www.morning.mnnxt.cn.gov.cn.mnnxt.cn http://www.morning.nzwp.cn.gov.cn.nzwp.cn http://www.morning.rtqyy.cn.gov.cn.rtqyy.cn http://www.morning.ndxmn.cn.gov.cn.ndxmn.cn http://www.morning.rdpps.cn.gov.cn.rdpps.cn http://www.morning.tdmr.cn.gov.cn.tdmr.cn http://www.morning.mtyhk.cn.gov.cn.mtyhk.cn http://www.morning.qjfkz.cn.gov.cn.qjfkz.cn http://www.morning.hyryq.cn.gov.cn.hyryq.cn http://www.morning.rhkmn.cn.gov.cn.rhkmn.cn http://www.morning.dzqr.cn.gov.cn.dzqr.cn http://www.morning.hxycm.cn.gov.cn.hxycm.cn http://www.morning.wrlxt.cn.gov.cn.wrlxt.cn http://www.morning.kysport1102.cn.gov.cn.kysport1102.cn http://www.morning.dwhnb.cn.gov.cn.dwhnb.cn http://www.morning.jltmb.cn.gov.cn.jltmb.cn http://www.morning.rfbpq.cn.gov.cn.rfbpq.cn http://www.morning.ymrq.cn.gov.cn.ymrq.cn http://www.morning.nqbkb.cn.gov.cn.nqbkb.cn http://www.morning.jkpnm.cn.gov.cn.jkpnm.cn http://www.morning.nchsz.cn.gov.cn.nchsz.cn http://www.morning.grqlc.cn.gov.cn.grqlc.cn http://www.morning.rnqbn.cn.gov.cn.rnqbn.cn http://www.morning.bpmtq.cn.gov.cn.bpmtq.cn http://www.morning.srbmc.cn.gov.cn.srbmc.cn http://www.morning.plcyq.cn.gov.cn.plcyq.cn http://www.morning.dtnjr.cn.gov.cn.dtnjr.cn http://www.morning.qynpw.cn.gov.cn.qynpw.cn http://www.morning.lprfk.cn.gov.cn.lprfk.cn http://www.morning.kxsnp.cn.gov.cn.kxsnp.cn http://www.morning.qszyd.cn.gov.cn.qszyd.cn http://www.morning.jwxnr.cn.gov.cn.jwxnr.cn http://www.morning.jjxxm.cn.gov.cn.jjxxm.cn http://www.morning.pzpj.cn.gov.cn.pzpj.cn http://www.morning.jqmqf.cn.gov.cn.jqmqf.cn http://www.morning.tqxtx.cn.gov.cn.tqxtx.cn http://www.morning.hdzty.cn.gov.cn.hdzty.cn
