视频号小店怎么样优化网站seo
使用queueRequest读写端口驱动的示例，驱动驱动程序使用一个基于asyn实现了asynCommon和asynOctet的驱动程序-CSDN博客中编写的驱动程序，本程序的C代码如下：
#include <stdlib.h>
#include <stdio.h>
#include <string.h>#include <cantProceed.h>
#include <epicsMutex.h>
#include <epicsEvent.h>
#include <epicsStdio.h>
#include <epicsAssert.h>
#include <asynDriver.h>
#include <asynOctet.h>
#include <iocsh.h>
#include <registryFunction.h>
#include <epicsExport.h>#define BUFFSIZE 80
/* 定义一个结构体：事件ID在驱动程序可以阻塞时，才有作用，一个asynOcte接口，驱动专用数据以及数据缓存*/
typedef struct MyData{epicsEventId done;asynOctet *pasynOctet;void *drvPvt;char buffer[BUFFSIZE];int id;
}MyData;static void timeoutCallback(asynUser *pasynUser){printf("in timeoutCallback\n");
}/* queueRequest的回调函数，原型：typedef void (*userCallback)(asynUser *pasynUser); */
static void queueCallback(asynUser *pasynUser)
{MyData *pmydata = pasynUser->userPvt; //用户数据区asynOctet *pasynOctet = pmydata->pasynOctet; //asynOcte接口void *pdrvPvt = pmydata->drvPvt; //驱动程序专用asynStatus status;size_t writeBytes, readBytes;int eomReason;asynPrint(pasynUser, ASYN_TRACE_FLOW, "queueCallback entered for Data ID: %d\n", pmydata->id);//将用户传入的数据写入设备printf("Start to Write '%s' to device\n", pmydata->buffer);/*原型：asynStatus (*write)(void *drvPvt,asynUser *pasynUser,const char *data,size_t numchars,size_t *nbytesTransfered);*/status = pasynOctet->write(pdrvPvt, pasynUser, pmydata->buffer, strlen(pmydata->buffer), &writeBytes);if (status != asynSuccess){asynPrint(pasynUser, ASYN_TRACE_ERROR, "queueCallback write failed:%s\n" ,pasynUser->errorMessage);}else{asynPrintIO(pasynUser, ASYN_TRACEIO_DEVICE, pmydata->buffer, strlen(pmydata->buffer),"queueCallback write sent %lu bytes\n", (unsigned long)writeBytes);printf("finished writing!\n");}// 清空用户缓存中的数据，为了验证回读的数据memset(pmydata->buffer, 0, BUFFSIZE);// 从设备读取数据到用户传入的缓存// asynStatus (*read)(void *drvPvt,asynUser *pasynUser,// char *data,size_t maxchars,size_t *nbytesTransfered,// int *eomReason);printf("Start to read from device\n");status = pasynOctet->read(pdrvPvt, pasynUser, pmydata->buffer, BUFFSIZE, &readBytes, &eomReason);if (status != asynSuccess){asynPrint(pasynUser, ASYN_TRACE_ERROR, "queueCallback read failed %s\n", pasynUser->errorMessage);}else{asynPrintIO(pasynUser, ASYN_TRACEIO_DEVICE, pmydata->buffer, BUFFSIZE, "queueCallback read returned: retlen %lu eomReason 0x%x data %s\n",(unsigned long)readBytes, eomReason, pmydata->buffer);printf("Finished reading，content： '%s'\n", pmydata->buffer);}// 如果驱动程序可阻塞，需要对阻塞线程发送信号，表示数据已经处理完成if (pmydata->done){epicsEventSignal(pmydata->done);}else{pasynManager->memFree(pasynUser->userPvt, sizeof(MyData));}status = pasynManager->freeAsynUser(pasynUser);if (status){asynPrint(pasynUser, ASYN_TRACE_ERROR, "freeAsynUser failed %s\n", pasynUser->errorMessage);}
}static void asynQueueRequest(const char *port, int addr, const char *message)
{MyData *pmyData1,*pmyData2;asynUser *pasynUser, *pasynUserDuplicate;asynStatus status;asynInterface *pasynInterface;int canBlock;// 分配两个结构体，并且初始化这两个结构体pmyData1 = (MyData *)pasynManager->memMalloc(sizeof(MyData));pmyData2 = (MyData *)pasynManager->memMalloc(sizeof(MyData));memset(pmyData1, 0, sizeof(MyData));memset(pmyData2, 0, sizeof(MyData));// 字符串传入第一个结构体缓存中strcpy(pmyData1->buffer, message);pmyData1->id = 1;// 使用queueRequest需要创建asynUser结构体，并且放入回调程序pasynUser = pasynManager->createAsynUser(queueCallback, NULL);pasynUser->timeout = 1.0;pasynUser->userPvt = pmyData1;// 通过port和addr连接驱动程序和使用的asynUserstatus = pasynManager->connectDevice(pasynUser, port, addr);if (status != asynSuccess){printf("can't connect to port:%s\n", pasynUser->errorMessage);return;}// 根据接口名称，查找对应的接口/*typedef struct asynInterface{const char *interfaceType;void *pinterface;void *drvPvt;}asynInterface;*/pasynInterface = pasynManager->findInterface(pasynUser, asynOctetType, 1);if (!pasynInterface){printf("this driver do not support interface: %s\n", asynOctetType);return;}// 获取asynOctet接口起始位置pmyData1->pasynOctet = (asynOctet *)pasynInterface->pinterface;// 获取驱动程序专用数据pmyData1->drvPvt = pasynInterface->drvPvt;// 结构体复制*pmyData2 = *pmyData1;pmyData2->id = 2;strcat(pmyData2->buffer, " repeated!");// 获取驱动程序是否可以阻塞canBlock = 0;pasynManager->canBlock(pasynUser, &canBlock);if (canBlock) pmyData2->done = epicsEventCreate(epicsEventEmpty);pasynUserDuplicate = pasynManager->duplicateAsynUser(pasynUser, queueCallback, NULL);pasynUserDuplicate->userPvt = pmyData2;// 排队两个请求status = pasynManager->queueRequest(pasynUser, asynQueuePriorityLow, 0.0);if (status){asynPrint(pasynUser, ASYN_TRACE_ERROR, "First queueRequest failed %s\n", pasynUser->errorMessage);}status = pasynManager->queueRequest(pasynUserDuplicate, asynQueuePriorityLow, 0.0);if (status){asynPrint(pasynUser, ASYN_TRACE_ERROR, "Second queueRequest failed %s\n", pasynUser->errorMessage);}if (canBlock){// 读写端口驱动的操作是在另外一个线程中进行，等待那个线程发送数据操作结束的事件epicsEventWait(pmyData2->done); // 数据2已经处理好了epicsEventDestroy(pmyData2->done);pasynManager->memFree(pmyData2, sizeof(MyData));}
}/* 向IOC shell注册 */
static const iocshArg asynQueueRequestArg0 = {"port", iocshArgString};
static const iocshArg asynQueueRequestArg1 = {"addr", iocshArgInt};
static const iocshArg asynQueueRequestArg2 = {"message", iocshArgString};
static const iocshArg *const asynQueueRequestArgs[] = {&asynQueueRequestArg0, &asynQueueRequestArg1, &asynQueueRequestArg2
};
static const iocshFuncDef asynQueueRequestDef = {"asynQueueRequest", 3, asynQueueRequestArgs};static void asynQueueRequestCall(const iocshArgBuf * args)
{asynQueueRequest(args[0].sval, args[1].ival, args[2].sval);
}static void asynQueueRequestRegister(void)
{static int firstTime = 1;if (!firstTime) return;firstTime = 0;iocshRegister(&asynQueueRequestDef, asynQueueRequestCall);
}epicsExportRegistrar(asynQueueRequestRegister);
添加一个文件asynQueueRequest.dbd，内容如下：
registrar("asynQueueRequestRegister")更改同一路径下的Makefile文件：
...
echoDriver_DBD += asynQueueRequest.dbdechoDriver_SRCS += asynQueueRequest.c
...
编译以上文件，编写启动脚本：
...
# 可以阻塞驱动程序，模拟单设备端口
echoDriverInit("SIM", 0.1, 0, 0)
...启动IOC，测试以上asynQueueRequest命令读写为名SIM的端口驱动：
可以看出客户端进行了两次写入-回读操作。
epics> asynQueueRequest "SIM" 0 "hello world"
Start to Write 'hello world' to device
finished writing!
Start to read from device
Finished reading，content： 'hello world'
Start to Write 'hello world repeated!' to device
finished writing!
Start to read from device
Finished reading，content： 'hello world repeated!'使用asynOctet接口的窗口进行测试，直接运行Read一次，可以从Input ASCII文本框中读取了驱动程序回传的数据，与最后一次写入驱动的数据相同。
