网站有关于我们的好处,衡水建立网站,西咸新区规划建设局网站,360网站建设服务文章目录 前言一、k8s部署方式二、学习k8s的方式今天主要配置k8s环境的方式今天遇到的是一个在k8s进行初始化的方式#xff0c;但是发现k8s不能正常初始化总是出现错误#xff0c;或者在错误中有问题的方式#xff0c;在网上查询挺多资料需要重新启动kub文件#xff0c;删除… 文章目录 前言一、k8s部署方式二、学习k8s的方式今天主要配置k8s环境的方式今天遇到的是一个在k8s进行初始化的方式但是发现k8s不能正常初始化总是出现错误或者在错误中有问题的方式在网上查询挺多资料需要重新启动kub文件删除kub文件的方法是就可以重新进行一个启动方式因为存在一个什么问题具体什么问题其实我也没有搞清楚但是不知道 1.引入库2.读入数据 总结 前言
提示这里可以添加本文要记录的大概内容 学习ks8第一天开始部署的方式 提示以下是本篇文章正文内容下面案例可供参考
一、k8s部署方式
出现的问题k8s部署问题
sts. This can take up to 4m0s [kubelet-check] Initial timeout of 40s passed. Unfortunately, an error has occurred:timed out waiting for the conditionThis error is likely caused by:- The kubelet is not running- The kubelet is unhealthy due to a misconfiguration of the node in some way (required cgroups disabled)If you are on a systemd-powered system, you can try to troubleshoot the error with the following commands:- systemctl status kubelet- journalctl -xeu kubeletAdditionally, a control plane component may have crashed or exited when started by the container runtime.To troubleshoot, list all containers using your preferred container runtimes CLI.Here is one example how you may list all Kubernetes containers running in docker:- docker ps -a | grep kube | grep -v pauseOnce you have found the failing container, you can inspect its logs with:- docker logs CONTAINERIDerror execution phase wait-control-plane: couldn’t initialize a Kubernetes cluster To see the stack trace of this error execute with --v5 or higher [rootk8s-master ~]# kubeadm config print init-defaults init.default.yaml W1128 13:29:56.206235 89761 configset.go:202] WARNING: kubeadm cannot validate component configs for API groups [kubelet.config.k8s.io kubeproxy.config.k8s.io] [rootk8s-master ~]# vi init.default.yaml [rootk8s-master ~]# systemctl restart kubelet [rootk8s-master ~]# kubeadm config images pull --configinit.default.yaml W1128 13:30:23.803498 90232 configset.go:202] WARNING: kubeadm cannot validate component configs for API groups [kubelet.config.k8s.io kubeproxy.config.k8s.io] failed to pull image “k8s.gcr.io/kube-apiserver:v1.18.0”: output: Error response from daemon: Get https://k8s.gcr.io/v2/: net/http: request canceled while waiting for connection (Client.Timeout exceeded while awaiting headers) , error: exit status 1 To see the stack trace of this error execute with --v5 or higher 出现这个错误我服了
[preflight] If you know what you are doing, you can make a check non-fatal with --ignore-preflight-errors... To see the stack trace of this error execute with --v5 or higher kubeadm reset
这个问题出现时间太久了我之前部署过一次就是重新启动服务然后结束服务成功进行现在不管是重新启动或者加入的方式就是无法重新启动启动获取token值的方式真的k8s太难了 我服了
我终于发现错误了
我的ip地址错误了
上面一直给我提示服务没有启动或者主机地址不存的的方式
我服了
一边学习k8s一边学习项目问题
今天做一个第一个项目的方式我的第一个项目的名称第一个项目是是什么我想想
二、学习k8s的方式
今天主要配置k8s环境的方式
今天遇到的是一个在k8s进行初始化的方式但是发现k8s不能正常初始化总是出现错误或者在错误中有问题的方式在网上查询挺多资料需要重新启动kub文件删除kub文件的方法是就可以重新进行一个启动方式因为存在一个什么问题具体什么问题其实我也没有搞清楚但是不知道
1.引入库
2.读入数据
代码如下示例 总结