当前位置： 首页 > news >正文

网站建设与网页设计从入门到精通 pdfseo优化排名经验

news 2025/7/8 22:29:16
网站建设与网页设计从入门到精通 pdf,seo优化排名经验,工商个人营业执照注册官网,wordpress注册用户邮件验证你好，这里是网络技术联盟站。 昨天给大家介绍了10个华为交换机的Python脚本： 10个华为华为交换机常用的Python脚本，网络工程师收藏！ 大家反响不错，后期我会陆续出一下思科、H3C、锐捷等厂商的脚本，前期会…

你好，这里是网络技术联盟站。

昨天给大家介绍了10个华为交换机的Python脚本：

  • 10个华为华为交换机常用的Python脚本，网络工程师收藏！

大家反响不错，后期我会陆续出一下思科、H3C、锐捷等厂商的脚本，前期会分享简单的，单一的脚本，后面会分享复杂的脚本！

今天给大家分享20个常用的Python脚本，用于控制和管理华为路由器：

1、登录和退出路由器：

import telnetlibHOST = "192.168.1.1"
user = "admin"
password = "admin"tn = telnetlib.Telnet(HOST)tn.read_until(b"Username: ")
tn.write(user.encode('ascii') + b"\n")tn.read_until(b"Password: ")
tn.write(password.encode('ascii') + b"\n")tn.write(b"quit\n")

2、获取路由器的系统信息：

import paramikohost = "192.168.1.1"
port = 22
username = "admin"
password = "admin"client = paramiko.SSHClient()
client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
client.connect(hostname=host, port=port, username=username, password=password)stdin, stdout, stderr = client.exec_command("display version")for line in stdout:print(line.strip())client.close()

3、配置路由器端口：

import telnetlibHOST = "192.168.1.1"
user = "admin"
password = "admin"tn = telnetlib.Telnet(HOST)tn.read_until(b"Username: ")
tn.write(user.encode('ascii') + b"\n")tn.read_until(b"Password: ")
tn.write(password.encode('ascii') + b"\n")tn.write(b"system-view\n")
tn.write(b"interface GigabitEthernet0/0/1\n")
tn.write(b"ip address 192.168.2.1 255.255.255.0\n")
tn.write(b"quit\n")tn.write(b"quit\n")

4、查看路由器端口状态：

import paramikohost = "192.168.1.1"
port = 22
username = "admin"
password = "admin"client = paramiko.SSHClient()
client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
client.connect(hostname=host, port=port, username=username, password=password)stdin, stdout, stderr = client.exec_command("display interface GigabitEthernet0/0/1")for line in stdout:print(line.strip())client.close()

5、配置路由器的SNMP：

import telnetlibHOST = "192.168.1.1"
user = "admin"
password = "admin"tn = telnetlib.Telnet(HOST)tn.read_until(b"Username: ")
tn.write(user.encode('ascii') + b"\n")tn.read_until(b"Password: ")
tn.write(password.encode('ascii') + b"\n")tn.write(b"system-view\n")
tn.write(b"snmp-agent sys-info version all\n")
tn.write(b"snmp-agent community read public\n")
tn.write(b"snmp-agent target-host trap address udp-domain 192.168.2.2 params securityname public\n")
tn.write(b"quit\n")tn.write(b"quit\n")

6、配置路由器的ACL：

import telnetlibHOST = "192.168.1.1"
user = "admin"
password = "admin"tn = telnetlib.Telnet(HOST)tn.read_until(b"Username: ")
tn.write(user.encode('ascii') + b"\n")tn.read_until(b"Password: ")
tn.write(password.encode('ascii') + b"\n")tn.write(b"system-view\n")tn.write(b"acl number 2000\n")
tn.write(b"rule 5 permit source 192.168.2.0 0.0.0.255\n")
tn.write(b"quit\n")tn.write(b"interface GigabitEthernet0/0/1\n")
tn.write(b"ip address 192.168.2.1 255.255.255.0\n")
tn.write(b"traffic-filter inbound acl 2000\n")
tn.write(b"quit\n")tn.write(b"quit\n")

7、配置路由器的静态路由：

import telnetlibHOST = "192.168.1.1"
user = "admin"
password = "admin"tn = telnetlib.Telnet(HOST)tn.read_until(b"Username: ")
tn.write(user.encode('ascii') + b"\n")tn.read_until(b"Password: ")
tn.write(password.encode('ascii') + b"\n")tn.write(b"system-view\n")
tn.write(b"ip route-static 192.168.3.0 255.255.255.0 192.168.2.2\n")
tn.write(b"quit\n")tn.write(b"quit\n")

8、配置路由器的NAT：

import telnetlibHOST = "192.168.1.1"
user = "admin"
password = "admin"tn = telnetlib.Telnet(HOST)tn.read_until(b"Username: ")
tn.write(user.encode('ascii') + b"\n")tn.read_until(b"Password: ")
tn.write(password.encode('ascii') + b"\n")tn.write(b"system-view\n")
tn.write(b"interface GigabitEthernet0/0/0\n")
tn.write(b"nat enable\n")
tn.write(b"quit\n")tn.write(b"nat address-group 1 192.168.2.0 0.0.0.255\n")
tn.write(b"nat server protocol tcp global 202.96.209.5 inside 192.168.2.100 80\n")
tn.write(b"quit\n")tn.write(b"quit\n")

9、配置路由器的DHCP：

import telnetlibHOST = "192.168.1.1"
user = "admin"
password = "admin"tn = telnetlib.Telnet(HOST)tn.read_until(b"Username: ")
tn.write(user.encode('ascii') + b"\n")tn.read_until(b"Password: ")
tn.write(password.encode('ascii') + b"\n")tn.write(b"system-view\n")
tn.write(b"dhcp enable\n")
tn.write(b"interface GigabitEthernet0/0/1\n")
tn.write(b"dhcp server excluded-ip-address 192.168.2.1\n")
tn.write(b"dhcp server pool 1\n")
tn.write(b"network 192.168.2.0 mask 255.255.255.0\n")
tn.write(b"gateway-list 192.168.2.1\n")
tn.write(b"dns-list 8.8.8.8 8.8.4.4\n")
tn.write(b"quit\n")tn.write(b"quit\n")

10、查看路由器的ARP表：

import paramikohost = "192.168.1.1"
port = 22
username = "admin"
password = "admin"client = paramiko.SSHClient()
client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
client.connect(hostname=host, port=port, username=username, password=password)stdin, stdout, stderr = client.exec_command("display arp")
arp_table = stdout.readlines()for line in arp_table:print(line.strip())client.close()

11、查看路由器的MAC地址表：

import paramikohost = "192.168.1.1"
port = 22
username = "admin"
password = "admin"client = paramiko.SSHClient()
client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
client.connect(hostname=host, port=port, username=username, password=password)stdin, stdout, stderr = client.exec_command("display mac-address")
mac_table = stdout.readlines()for line in mac_table:print(line.strip())client.close()

12、查看路由器的路由表：

import paramikohost = "192.168.1.1"
port = 22
username = "admin"
password = "admin"client = paramiko.SSHClient()
client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
client.connect(hostname=host, port=port, username=username, password=password)stdin, stdout, stderr = client.exec_command("display ip routing-table")
route_table = stdout.readlines()for line in route_table:print(line.strip())client.close()

13、查看路由器的接口状态：

import paramikohost = "192.168.1.1"
port = 22
username = "admin"
password = "admin"client = paramiko.SSHClient()
client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
client.connect(hostname=host, port=port, username=username, password=password)stdin, stdout, stderr = client.exec_command("display interface brief")
interface_table = stdout.readlines()for line in interface_table:print(line.strip())client.close()

14、查看路由器的系统资源使用情况：

import paramikohost = "192.168.1.1"
port = 22
username = "admin"
password = "admin"client = paramiko.SSHClient()
client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
client.connect(hostname=host, port=port, username=username, password=password)stdin, stdout, stderr = client.exec_command("display system resource")
resource_info = stdout.readlines()for line in resource_info:print(line.strip())client.close()

15、查看路由器的系统版本：

import paramikohost = "192.168.1.1"
port = 22
username = "admin"
password = "admin"client = paramiko.SSHClient()
client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
client.connect(hostname=host, port=port, username=username, password=password)stdin, stdout, stderr = client.exec_command("display version")
version_info = stdout.readlines()for line in version_info:print(line.strip())client.close()

16、查看路由器的运行时间：

import paramikohost = "192.168.1.1"
port = 22
username = "admin"
password = "admin"client = paramiko.SSHClient()
client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
client.connect(hostname=host, port=port, username=username, password=password)stdin, stdout, stderr = client.exec_command("display clock")
clock_info = stdout.readlines()for line in clock_info:print(line.strip())client.close()

17、查看路由器的接口详细信息：

import paramikohost = "192.168.1.1"
port = 22
username = "admin"
password = "admin"client = paramiko.SSHClient()
client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
client.connect(hostname=host, port=port, username=username, password=password)stdin, stdout, stderr = client.exec_command("display interface")
interface_info = stdout.readlines()for line in interface_info:print(line.strip())client.close()

18、查看路由器的NAT转换表：

import paramikohost = "192.168.1.1"
port = 22
username = "admin"
password = "admin"client = paramiko.SSHClient()
client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
client.connect(hostname=host, port=port, username=username, password=password)stdin, stdout, stderr = client.exec_command("display nat session table")
nat_table = stdout.readlines()for line in nat_table:print(line.strip())client.close()

19、查看路由器的DNS服务器列表：

import paramikohost = "192.168.1.1"
port = 22
username = "admin"
password = "admin"client = paramiko.SSHClient()
client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
client.connect(hostname=host, port=port, username=username, password=password)stdin, stdout, stderr = client.exec_command("display dns server")
dns_info = stdout.readlines()for line in dns_info:print(line.strip())client.close()

20、查看路由器的DHCP服务器配置：

import paramikohost = "192.168.1.1"
port = 22
username = "admin"
password = "admin"client = paramiko.SSHClient()
client.set_missing_host_key_policy(paramiko.AutoAddPolicy())
client.connect(hostname=host, port=port, username=username, password=password)stdin, stdout, stderr = client.exec_command("display dhcp server configuration")
dhcp_info = stdout.readlines()for line in dhcp_info:print(line.strip())client.close()

这些Python脚本可以帮助你快速查看华为路由器的各种信息，也可以作为开发的基础，进行更多高级的操作和自动化任务。

http://www.tj-hxxt.cn/news/16998.html

相关文章：

  • 久治县wap网站建设公司重庆seo报价
  • 微信对接网站可以做301跳转吗网络推广公司有多少家
  • 有男女做暖暖的视频网站列举网络推广的方式
  • php ajax网站开发典型实例ip子域名大全
  • 公司开通网站百度搜索引擎使用技巧
  • wordpress 主题语言app优化方案
  • 免费在线观看纯爱大片电子商务seo是什么意思
  • 网页设计跟做网站一样吗南宁网站优化
  • 网站建设培训机构郑州百度推广外包
  • 网站建设销售话术文本格式全球外贸b2b网站
  • 网站模板化个人域名注册流程
  • 琼海网站建设长沙网络推广平台
  • 深圳服装网站建设广州网络推广选择
  • 网站建设的售后服务怎么写搜索引擎有哪几个网站
  • 提供秦皇岛网站建设价格廊坊seo
  • 网管系统知乎seo优化
  • 个人门户登录广东seo外包服务
  • 苏州智信建设职业培训网站怎样申请自己的电商平台
  • 网站建设基本流程备案优化关键词的方法有哪些
  • 哪个地方可学习网站建设fifa最新排名出炉
  • 大冶网站建设营销软件app
  • 网站建设及网站推广优化措施最新回应
  • 提高网站粘性谷歌推广怎么操作
  • 请别人做网站需要注意什么seo优化内页排名
  • 响应式网站开发报价百度官方网站网址
  • 网站建设做到哪些内容灰色行业seo大神
  • 软件技术专业可以从事什么工作哈尔滨seo服务
  • 做垃圾桶的网站免费个人网页制作
  • 游戏网站cms网站优化seo
  • 网站开发和web前端开发区别阿里大数据官网