网站建设与推广推荐百度有哪些app产品

fdf的全称叫做flash device file，它用于描述固件在flash中的布局和位置，他可以分为几个部分[Defines]，[FD]，[FV]，[Rule]，本文主要介绍如下关键的3个部分：

• FD Section
  这个部分需要在起始的地方标注[FD.xxx]，一个fdf文件中可以分为多个FD Section。

 ################################################################################## FD Section# The [FD] Section is made up of the definition statements and a# description of what goes into  the Flash Device Image.  Each FD section# defines one flash "device" image.  A flash device image may be one of# the following: Removable media bootable image (like a boot floppy# image,) an Option ROM image (that would be "flashed" into an add-in# card,) a System "Flash"  image (that would be burned into a system's# flash) or an Update ("Capsule") image that will be used to update and# existing system flash.#################################################################################[FD.QcomModule_EFI]BaseAddress   = 0x80200000|gEmbeddedTokenSpaceGuid.PcdEmbeddedFdBaseAddress  #The base address of the FLASH Device.Size          = 0x00024000|gEmbeddedTokenSpaceGuid.PcdEmbeddedFdSize         #The size in bytes of the FLASH DeviceErasePolarity = 1BlockSize     = 0x200NumBlocks     = 0x120 

• FD Region

每个FD的最后都会跟上该FD的区域布局，通过Region Type可以来表示存放在该FD中的内容类型，比如是FV还是DATA，或者是FILE。举例如下：

 ################################################################################## Following are lists of FD Region layout which correspond to the locations of different# images within the flash device.## Regions must be defined in ascending order and may not overlap.## A Layout Region start with a eight digit hex offset (leading "0x" required) followed by# the pipe "|" character, followed by the size of the region, also in hex with the leading# "0x" characters. Like:# Offset|Size# PcdOffsetCName|PcdSizeCName# RegionType <FV, DATA, or FILE>################################################################################## 512 bytes of configuration header & 8 bytes of image header0x00000000|0x00024000gEmbeddedTokenSpaceGuid.PcdFlashFvMainBase|gEmbeddedTokenSpaceGuid.PcdFlashFvMainSizeFV = FVMAIN_COMPACT

这里的FV表示存放在该FD中的FV是什么，本例表示存放的是FVMAIN_COMPACT这个FV，它会在下面进行定义。

• FV（Flash Volume）

该区域定义该FD的布局形势，其中包含很多inf文件，表示的是该FD包含的各个子模块，该区域需要在起始位置标注[FV]如下所示：

################################################################################
#
# FV Section
#
# [FV] section is used to define what components or modules are placed within a flash
# device file.  This section also defines order the components and modules are positioned
# within the image.  The [FV] section consists of define statements, set statements and
# module statements.
#
################################################################################[FV.FvMain]
BlockSize          = 0x40
NumBlocks          = 0         # This FV gets compressed so make it just big enough
FvAlignment        = 8         # FV alignment and FV attributes setting.
ERASE_POLARITY     = 1
MEMORY_MAPPED      = TRUE
STICKY_WRITE       = TRUE
LOCK_CAP           = TRUE
LOCK_STATUS        = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP  = TRUE
WRITE_STATUS       = TRUE
WRITE_LOCK_CAP     = TRUE
WRITE_LOCK_STATUS  = TRUE
READ_DISABLED_CAP  = TRUE
READ_ENABLED_CAP   = TRUE
READ_STATUS        = TRUE
READ_LOCK_CAP      = TRUE
READ_LOCK_STATUS   = TRUE
FvNameGuid         = 046fae99-cf2e-49ed-a6a8-a1488b7e80d3INF QcomModulePkg/Application/LinuxLoader/LinuxLoader.inf[FV.FVMAIN_COMPACT]FvAlignment        = 8ERASE_POLARITY     = 1MEMORY_MAPPED      = TRUESTICKY_WRITE       = TRUELOCK_CAP           = TRUELOCK_STATUS        = TRUEWRITE_DISABLED_CAP = TRUEWRITE_ENABLED_CAP  = TRUEWRITE_STATUS       = TRUEWRITE_LOCK_CAP     = TRUEWRITE_LOCK_STATUS  = TRUEREAD_DISABLED_CAP  = TRUEREAD_ENABLED_CAP   = TRUEREAD_STATUS        = TRUEREAD_LOCK_CAP      = TRUEREAD_LOCK_STATUS   = TRUEFILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {SECTION FV_IMAGE = FVMAIN}}